Case
| APEX SKU'S | SUB GROUP | MAIN DESCRIPTION | Image | Buy Now |
|---|---|---|---|---|
| CEM62050 | CASE ALL | HYD. LIFT PUMP ASSY 7/8" 13 Spline Shaft |  | |
| CIE65010 | CASE ALL | HYD. LIFT PUMP ASSY WITH GASKET AND O RING (Gray Painted) |  | |
| CIE65011 | CASE ALL | GASKET HYD PUMP | ||
| CIE65015 | CASE ALL | STEERING PUMP |  | |
| CIE65020 | CASE ALL | STEERING PUMP 12GPM & 2250PSI |  | |
| CIE65025 | CASE ALL | STEERING PUMP |  | |
| CIE65030 | CASE ALL | HYDRAULIC PUMP |  | |
| CIE65035 | CASE ALL | HYDRAULIC PUMP |  | |
| CIE65040 | CASE ALL | HYDRAULIC PUMP |  | |
| CIE65045 | CASE ALL | HYDRAULIC PUMP |  | |
| CIE65050 | CASE ALL | HYDRAULIC PUMP |  | |
| CIE65055 | CASE ALL | HYDRAULIC PUMP |  | |
| CIE65060 | CASE ALL | HYDRAULIC PUMP FORD |  | |
| CIE65065 | CASE ALL | HYDRAULIC PUMP AXIAL PISTON PVE19L |  | |
| CIE65070 | CASE ALL | RELIEF VALVE 2300PSI |  | |
| CIE65075 | CASE ALL | RELIEF VALVE 2500PSI |  | |
| CIE65080 | CASE ALL | RELIEF VALVE ASSY |  | |
| CIE65085 | CASE ALL | HYDRAULIC PUMP COUPLING |  | |
| CIE65090 | CASE ALL | HYDRAULIC PUMP DRIVE COUPLER 17 TOOTH |  | |
| CIE65095 | CASE ALL | HYDRAULIC PUMP DRIVE COUPLING 13-SPLINED |  | |
| CIE65100 | CASE ALL | COUPLER BUSHING (11.38MM ID X 25.15MM OD X 23.11MM LONG) Fits Case Hydraulic Coupling 257948A1 |  | |
| CIE65105 | CASE ALL | CONNECTOR |  | |
| CIE65110 | CASE ALL | HYD REPAIR KIT |  | |
| CIE65115 | CASE ALL | HYD. PUMP PISTON HOUSING WITH PISTON & PLATE |  | |
| CIE65120 | CASE ALL | HYD. PUMP WEAR PLATE |  | |
| CIE65125 | CASE ALL | COUPLER KIT INTERNAL FEMALE |  | |
| CIE65130 | CASE ALL | HYD. LIFT SUCTION PIPE FILTER |  | |
| CIE65133 | CASE ALL | Leveling Assy R/H f |  | |
| CIE65135 | CASE ALL | KING PIN KIT CENTRE CUT |  | |
| CIE65140 | CASE ALL | KING PIN KIT SIDE CUT |  | |
| CIE65145 | CASE ALL | PIN KIT 580B/580C |  | |
| CIE65150 | CASE ALL | PIN KIT 580B/580C |  | |
| CIE65155 | CASE ALL | STABILIZER PIN KIT FIT G110672 & G110673) |  | |
| CIE65156 | CASE ALL | STEERING WHEEL 13 INCH |  | |
| CIE65160 | CASE ALL | TRUNION PIN KIT |  | |
| CIE65165 | CASE ALL | TRUNION PIN LOWER |  | |
| CIE65170 | CASE ALL | TRUNION PIN UPPER |  | |
| CIE65175 | CASE ALL | AXLE PIN |  | |
| CIE65180 | CASE ALL | PIN 40 X 180 MM Bucket upper and lower |  | |
| CIE65185 | CASE ALL | PIN 50 X 306 MM |  | |
| CIE65190 | CASE ALL | PIN 70 X 163 MM |  | |
| CIE65195 | CASE ALL | PIN 45 X 204.50 MM |  | |
| CIE65200 | CASE ALL | PIN 44.90 X 319 MM |  | |
| CIE65205 | CASE ALL | PIN |  | |
| CIE65210 | CASE ALL | PIN 45mm OD x 202mm L |  | |
| CIE65215 | CASE ALL | PIN 50.8mm OD x 168.91mm L CENTER SLOT |  | |
| CIE65220 | CASE ALL | PIN 50.8mm OD x 168.91mm L SIDE SLOT |  | |
| CIE65225 | CASE ALL | PIN 55mm OD x 122mm |  | |
| CIE65230 | CASE ALL | PIN 50MM OD X 240MM L WITH SNAP RING GROOVE |  | |
| CIE65235 | CASE ALL | PIN (40MM OD X 179MM L) FRAME, LOADER LIFT |  | |
| CIE65240 | CASE ALL | PIN, LIFT CYLINDER ROD END (RIGHT HAND) (40MM OD X 155MM L) |  | |
| CIE65245 | CASE ALL | PIN, BUCKET TO COUPLER (FOR 12" BUCKETS) |  | |
| CIE65250 | CASE ALL | LOWER BUCKET PIN |  | |
| CIE65255 | CASE ALL | UPPER BUCKET PIN |  | |
| CIE65260 | CASE ALL | TILT CYLINDER ROD PIN |  | |
| CIE65265 | CASE ALL | PIN 50mm OD x 290mm L |  | |
| CIE65270 | CASE ALL | PIN | | |
| CIE65275 | CASE ALL | PIN, SWING TOWER TO FRAME (UPPER) |  | |
| CIE65280 | CASE ALL | PIN, SWING CYLINDER TO TOWER |  | |
| CIE65285 | CASE ALL | PIN, SWING CYLINDER TO TOWER 40.04MM OD X 160MM L |  | |
| CIE65290 | CASE ALL | PIN, SWING CYLINDER TUBE |  | |
| CIE65295 | CASE ALL | PIN, SWING CYLINDER TUBE |  | |
| CIE65300 | CASE ALL | PIN |  | |
| CIE65305 | CASE ALL | PIN (38MM OD X 246MM L), BUCKET TO DIPPER ARM FITS BUCKETS WIDER THAN 12 |  | |
| CIE65310 | CASE ALL | PIN (1.5" OD X10 7/16" L), STABILIZER PLATE TO LEG |  | |
| CIE65315 | CASE ALL | PIN, 38.1MM OD X 187.32MM L CYLINDER TO LEG(7.25" LONG) |  | |
| CIE65320 | CASE ALL | PIN, PIN (1.75" OD X 5 5/16 L) |  | |
| CIE65325 | CASE ALL | PIN (44.29MM OD X 372.6MM L) BUCKET TO COUPLER(FITS BUCKETS WIDER THAN 12) |  | |
| CIE65330 | CASE ALL | PIN, DIPPER TO BUCKET (44.38MM OD X 331MM L) |  | |
| CIE65335 | CASE ALL | SPACER (23.75MM ID X 38.07MM OD X 135MM L) BUSHING, BUCKET LINK PIVOT |  | |
| CIE65340 | CASE ALL | PIN (40MM OD X 125MM L) |  | |
| CIE65345 | CASE ALL | PIN, STABILIZER PLATE TO LEG (38.1MM OD X 323.5MM L) |  | |
| CIE65350 | CASE ALL | PIN BOOM TO DIPPER (70MM OD X 331MM L) |  | |
| CIE65355 | CASE ALL | PIN, SWING TOWER TO FRAME(LOWER) 70MM OD X 152MM L |  | |
| CIE65360 | CASE ALL | PIN 50MM OD X 199MM L |  | |
| CIE65365 | CASE ALL | PIN, LINK TO COUPLER 44.45MM OD X 167MM L |  | |
| CIE65370 | CASE ALL | PIN, STABILIZER LEG TO FRAME 44.4MM OD X 308MM L |  | |
| CIE65375 | CASE ALL | PIN, DIPPER CYLINDER TO BOOM |  | |
| CIE65380 | CASE ALL | PIN, DIPPER CYLINDER ROD END TO DIPPER 50MM OD X 167MM L |  | |
| CIE65385 | CASE ALL | PIN, BOOM CYLINDER TO SWING TOWER 50MM OD X 170MM L |  | |
| CIE65390 | CASE ALL | PIN, BOOM TO SWING TOWER 70MM OD X 98MM L |  | |
| CIE65395 | CASE ALL | PIN, STABILIZER LEG TO FRAME |  | |
| CIE65400 | CASE ALL | PIN, CYLINDER TO FRAME |  | |
| CIE65405 | CASE ALL | PIN WITH BOLT HOLE |  | |
| CIE65410 | CASE ALL | PIN, SWING TOWER TO BOOM |  | |
| CIE65415 | CASE ALL | PIN WITH BOLT HOLE |  | |
| CIE65420 | CASE ALL | PIN |  | |
| CIE65425 | CASE ALL | PIN 44.42MM OD x 188MM L |  | |
| CIE65430 | CASE ALL | PIN PIN,54.9MM OD x 148MM L |  | |
| CIE65435 | CASE ALL | PIN |  | |
| CIE65440 | CASE ALL | PIN 70mm OD x 310.1mm L |  | |
| CIE65445 | CASE ALL | PIN 70mm OD x 330mm |  | |
| CIE65450 | CASE ALL | PIN PIN,59.9mm OD x 192.1mm L |  | |
| CIE65455 | CASE ALL | PIN 79.9mm OD x 168mm L |  | |
| CIE65460 | CASE ALL | PIN 50.77mm OD x 146.7mm L |  | |
| CIE65465 | CASE ALL | PIN 79.9mm OD x 152mm L |  | |
| CIE65470 | CASE ALL | PIN 59.9mm OD x 102mm L |  | |
| CIE65475 | CASE ALL | PIN, STABILIZER CYLINDER TO LEG 152.4mm OD x 44.45mm L |  | |
| CIE65480 | CASE ALL | PIN, BOOM TO DIPPER |  | |
| CIE65485 | CASE ALL | PIN, DIPPER CYLINDER TO BOOM 70MM OD X 230MM LONG |  | |
| CIE65490 | CASE ALL | PIN, BOOM CYLINDER TO SWING TOWER 80mm OD x 160.5mm L |  | |
| CIE65495 | CASE ALL | PIN, BOOM TO SWING TOWER |  | |
| CIE65500 | CASE ALL | PIN, BOOM TO SWING TOWER |  | |
| CIE65505 | CASE ALL | PIN, SWING TOWER TO FRAME UPPER |  | |
| CIE65510 | CASE ALL | PIN, SWING TOWER TO FRAME (LOWER) 70mm OD x 175mm L |  | |
| CIE65515 | CASE ALL | PIN, BUCKET CYLINDER TO DIPPER 60mm OD X 199mm L |  | |
| CIE65520 | CASE ALL | PIN, DIPPER TO BUCKET(ALL BUCKETS EXCEPT 12") (44.29MM OD X 372.6MM L) |  | |
| CIE65525 | CASE ALL | PIN, LINK TO COUPLER |  | |
| CIE65530 | CASE ALL | PIN, BOOM TO SWING TOWER(USE WITH 303646A1) 70MMOD X 112MM L |  | |
| CIE65535 | CASE ALL | PIN, DIPPER CYLINDER TO BOOM WITH CENTER GREASE GROOVE 60MM OD X 240MM L |  | |
| CIE65540 | CASE ALL | PIN, BOOM CYLINDER TO BOOM |  | |
| CIE65545 | CASE ALL | PIN, BOOM CYLINDER TO SWING TOWER 60MM OD X 159.6MM L |  | |
| CIE65550 | CASE ALL | PIN, SWING TOWER TO FRAME UPPER 70MM OD X 128.5MM L |  | |
| CIE65555 | CASE ALL | PIN, SWING CYLINDER ROD END TO SWING TOWER |  | |
| CIE65560 | CASE ALL | PIN, STABILIZER PLATE TO LEG - RUBBER (38.1MM OD X 238.13MM L) |  | |
| CIE65565 | CASE ALL | PIN, BUCKET TO DIPPER |  | |
| CIE65570 | CASE ALL | PIVOT PIN |  | |
| CIE65575 | CASE ALL | PIN, BUCKET TO DIPPER FITS ONLY 12" BUCKET |  | |
| CIE65580 | CASE ALL | PIN, STABILIZER PLATE TO LEG - RUBBER |  | |
| CIE65585 | CASE ALL | PIN, CYLINDER TO LEG (7.75" LONG) |  | |
| CIE65590 | CASE ALL | PIN, STABILIZER LEG TO FRAME |  | |
| CIE65595 | CASE ALL | PIN, STABILIZER LEG TO FRAME |  | |
| CIE65600 | CASE ALL | PIN, CYLINDER TO FRAME |  | |
| CIE65605 | CASE ALL | PIN, CYLINDER TO FRAME |  | |
| CIE65610 | CASE ALL | PIN, BACKHOE MOUNT (LOWER) |  | |
| CIE65615 | CASE ALL | PIN 44.45mm OD x 211.84mm L |  | |
| CIE65620 | CASE ALL | PIN 44.45mm OD x 211.84mm L |  | |
| CIE65625 | CASE ALL | PIN 50.8mm OD x 304.8mm L |  | |
| CIE65630 | CASE ALL | PIN 44.45mm OD x 142.24mm L |  | |
| CIE65635 | CASE ALL | PIN 38.1mm OD x 96.52mm L |  | |
| CIE65640 | CASE ALL | PIN, SWING TOWER TO BOOM |  | |
| CIE65645 | CASE ALL | PIN 50.8mm OD x 402mm L |  | |
| CIE65650 | CASE ALL | PIN 44.4mm OD x 196.5mm L |  | |
| CIE65655 | CASE ALL | PIN, EXTENSION CYLINDER TO HOUSING 38.1mm OD x 203.2mm L |  | |
| CIE65660 | CASE ALL | PIN, DIPPER CYLINDER TO HOUSING 44.45mm OD x 255.59mm |  | |
| CIE65665 | CASE ALL | PIN, DIPPER TO BUCKET LINKS 44.45mm OD x 278.89mm L |  | |
| CIE65670 | CASE ALL | PIN, BUCKET LOWER 38.1mm OD x 179.83mm L |  | |
| CIE65675 | CASE ALL | PIN, BUCKET UPPER 38.1mm OD x 179.83mm L |  | |
| CIE65680 | CASE ALL | PIN, TILT CYLINDER FOR 580D-580E |  | |
| CIE65685 | CASE ALL | SHAFT, MAIN FRAME (1.75" OD) |  | |
| CIE65690 | CASE ALL | PIN, LIFT CYLINDER |  | |
| CIE65695 | CASE ALL | SHAFT, MAIN FRAME |  | |
| CIE65700 | CASE ALL | PIN, LIFT CYLINDER TUBE END |  | |
| CIE65705 | CASE ALL | PIN |  | |
| CIE65710 | CASE ALL | PIN, SWING TOWER TO BOOM TWO PIN STYLE 50.8mm OD x 136mm L |  | |
| CIE65715 | CASE ALL | PIN |  | |
| CIE65720 | CASE ALL | PIN |  | |
| CIE65725 | CASE ALL | PIN WITH LOCK RING GROOVES |  | |
| CIE65730 | CASE ALL | PIN |  | |
| CIE65735 | CASE ALL | SWING ROD PIN |  | |
| CIE65740 | CASE ALL | PIN LOWER, SWING TOWER TO FRAME, GREASE FITTING MOUNTS IN TOP OF PIN |  | |
| CIE65745 | CASE ALL | PIN STEERING LINK |  | |
| FAP14595 | CASE ALL | SPINDLE BEARING T-199 T199 |  | |
| CIE65755 | CASE ALL | NEEDLE BEARING B3216 |  | |
| CIE65760 | CASE ALL | SPHERICAL ROLLER BEARING |  | |
| CIE65765 | CASE ALL | SEAL SEAL OIL, AXLE HOUSING 38x50x7 |  | |
| CIE65770 | CASE ALL | SEAL |  | |
| CIE65775 | CASE ALL | OIL SEAL |  | |
| CIE65780 | CASE ALL | SPINDLE HALF THREAD BOLT |  | |
| CIE65785 | CASE ALL | STRAP BOLT 1/4 UNF X 28 TPI |  | |
| CIE65790 | CASE ALL | STRAP BOLT 3/8UNF |  | |
| CIE65795 | CASE ALL | HEX BOLT |  | |
| CIE65800 | CASE ALL | SPINDLE WASHER THREADED TYPE OD-60.50MM(8.75 ID )THIK 5 MM |  | |
| CIE65805 | CASE ALL | STEEL WASHER (50.80*69.5*0.80MM) |  | |
| CIE65810 | CASE ALL | FRONT & REAR AXLE SPRING WASHER |  | |
| CIE65815 | CASE ALL | AXLE SPRING WASHER |  | |
| CIE65820 | CASE ALL | GREASE NIPPLE STRAIGHT M6X1 |  | |
| CIE65825 | CASE ALL | GREASE NIPPLE 45 DEGREE M6X1 |  | |
| CIE65830 | CASE ALL | GREASE NIPPLE 45 DEGREE |  | |
| CIE65835 | CASE ALL | BEARING NEEDLE ROLER SET OF 10PCS 168 ROLER NEED FOR PLANETARY GEAR |  | |
| CIE65845 | CASE ALL | BUSHING, LOADER FRAME PIVOT 50.2MM ID X 60MM OD X 30MM L |  | |
| CIE65850 | CASE ALL | BUSHING, SWING CYLINDER PIVOTUPPER 50.96MM ID X 63.5MM OD X 28.6MM |  | |
| CIE65855 | CASE ALL | BUSHING, SWING CYLINDER PIVOTLOWER 50.94MM ID X 63.5MM OD X 38.1MM L |  | |
| CIE65860 | CASE ALL | BUSHING 50 ID X 30MM LONG |  | |
| CIE65865 | CASE ALL | BUSHING LOADER BUCKET CYLINDER TUBE TO LINK |  | |
| CIE65870 | CASE ALL | BUSHING, LOADER FRAME 38.41MM ID X 47.65MM OD X 28.6MM L |  | |
| CIE65875 | CASE ALL | BUSHING LOADER FRAME 40.3MM ID X 50MM OD X 35MM L |  | |
| CIE65880 | CASE ALL | BUCKET BUSHING SMALL 38.41MM ID X 47.63MM OD X 31.75MM L |  | |
| CIE65885 | CASE ALL | BUCKET BUSHING LARGE 1-3/4 X 2-1/4 X 1-1/4 LONG |  | |
| CIE65890 | CASE ALL | BUSHING, STABILIZER LEG 44.68MM ID X 57.15MM OD X 38.1MM L |  | |
| CIE65895 | CASE ALL | BUSHING 70.19MM ID X 90MM OD X 44MM L |  | |
| CIE65900 | CASE ALL | BUSHING 70.19MM ID X 90MM OD X 44MM L |  | |
| CIE65905 | CASE ALL | BUSHING, OUTER BOOM PIVOT 70.19MM ID X 90MM OD X 24MM L |  | |
| CIE65910 | CASE ALL | BUSHING, UPPER SWING TOWER PIVOT TOP 70.5MM ID X 86MM OD X 30MM L |  | |
| CIE65915 | CASE ALL | BUSHING, UPPER SWING TOWER PIVOT(BOTTOM) 70.19MM ID X 86MM OD X 28MM L |  | |
| CIE65920 | CASE ALL | BUSHING, LOWER SWING TOWER PIVOT TOP WITH OUT SLOT 70.19MM ID X 86MM OD X 34MM L |  | |
| CIE65925 | CASE ALL | BUSHING WITH OUT GROOVE 70.19MM ID X 94MM OD X 40MM L |  | |
| CIE65930 | CASE ALL | BUSHING 50.22MM ID X 60MM OD X 25.5MM L |  | |
| CIE65935 | CASE ALL | BUSHING 50.22MM ID X 60MM OD X 54MM L |  | |
| CIE65940 | CASE ALL | BUSHING 50.19MM ID X 60MM OD X 34MM L |  | |
| CIE65945 | CASE ALL | BUSHING 57.34MM ID X 70MM OD X 30MM L |  | |
| CIE65950 | CASE ALL | BUSHING, BOOM TO SWING TOWER 70.19MM ID X 94MM OD X 38MM L |  | |
| CIE65955 | CASE ALL | BUSHING, INNER SWING PIVOT 70.19MM ID X 94MM OD X 30MM L |  | |
| CIE65960 | CASE ALL | BUSHING, LINK PIVOT 38.33MM ID X 47.63MM OD X 25.4MM L |  | |
| CIE65965 | CASE ALL | BUSHING, LOADER FRAME (580C, 580D, 580E) 44.68MM ID X 53.98MM OD X 31.75MM L |  | |
| CIE65970 | CASE ALL | BUCKET BUSHING 40.3MM ID X 50MM OD X 28MM L |  | |
| CIE65975 | CASE ALL | BUSHING, LOADER FRAME 40.23MM ID X 50MM OD X 70MM L |  | |
| CIE65980 | CASE ALL | BUSHING, INNER BOOM PIVOT 70.19MM OD X 94MM OD X 24MM L |  | |
| CIE65985 | CASE ALL | BUSHING, SWING CYLINDER PIVOT 40.19MM ID X 55MM OD X 30MM L |  | |
| CIE65990 | CASE ALL | BUSHING, SWING CYLINDER PIVOT 40.19MM ID X 55MM OD X 38MM L |  | |
| CIE65995 | CASE ALL | BUSHING 50 X 70 X 78MM LONG |  | |
| CIE66000 | CASE ALL | BUSHING 50.19mm ID x 74mm OD x 40mm L |  | |
| CIE66005 | CASE ALL | BUSHING 44.75MM ID X 57.15MM OD X 29MM L |  | |
| CIE66010 | CASE ALL | BUSHING - 70 MM ID, LOWER, BACKHOE FRAME, SWING TOWER MOUNTING |  | |
| CIE66015 | CASE ALL | BUSHING - 70 MM ID, UPPER, BACKHOE FRAME, SWING TOWER MOUNTING |  | |
| CIE66020 | CASE ALL | BUSHING, DIPPER AT BUCKET 44.6MM ID X 57.15MM OD X 94MM L |  | |
| CIE66025 | CASE ALL | BUSHING 44.6MM ID X 57.15MM OD X 94MM L |  | |
| CIE66030 | CASE ALL | BUSHING 70MM OD WITH SLOT 2" (50MM) ID X 2-1/8" (54MM) LONG |  | |
| CIE66035 | CASE ALL | BUSHING, SWING CYLINDER PIVOT 80.19MM ID X 90MM OD X 29.35MM L |  | |
| CIE66040 | CASE ALL | SWING CYLINDER TUBE BUSHING 69.92MM ID X 77MM OD X 28MM L |  | |
| CIE66045 | CASE ALL | BUSHING, SWING TOWER TO BOOM CYLINDER 60.2MM ID X 70MM OD X 36MM L |  | |
| CIE66050 | CASE ALL | BUSHING 55.19mm ID x 65mm OD x 38mm L |  | |
| CIE66055 | CASE ALL | BUSHING 55.25mm ID x 67.7mm OD x 29mm L |  | |
| CIE66060 | CASE ALL | BUSHING |  | |
| CIE66065 | CASE ALL | BUSHING |  | |
| CIE66070 | CASE ALL | BUSHING BOOM AT SWING TOWER |  | |
| CIE66075 | CASE ALL | BUSHING(DIPPER STICK) |  | |
| CIE66080 | CASE ALL | BUSHING |  | |
| CIE66085 | CASE ALL | BUSHING |  | |
| CIE66090 | CASE ALL | BUSHING |  | |
| CIE66095 | CASE ALL | BUSHING |  | |
| CIE66100 | CASE ALL | BUSHING |  | |
| CIE66105 | CASE ALL | BUSHING, BOOM AT DIPPER AND BOOM CYLINDER 70.19MM ID X 80MM OD X 46MM L |  | |
| CIE66110 | CASE ALL | BUSHING, BOOM TO DIPPER LEFT 80.19MM ID X 100MM OD X 56MM L |  | |
| CIE66115 | CASE ALL | BUSHING, BOOM TO DIPPER RIGHT 80.19MM ID X 100MM OD X 56MM L |  | |
| CIE66120 | CASE ALL | BUSHING, BOOM TO SWING TOWER 80.19MM ID X 104MM OD X 42MM L |  | |
| CIE66125 | CASE ALL | BUSHING, BOOM CYLINDER PIVOT 80.19MM ID X 100MM OD X 32MM L |  | |
| CIE66130 | CASE ALL | BUSHING, OUTER SWING PIVOT 80.19 ID X 90 OD X 20 LONG |  | |
| CIE66135 | CASE ALL | BUSHING, SWING TOWER PIVOT 70.19MM ID X 90MM OD X 30MM L |  | |
| CIE66140 | CASE ALL | BUSHING (20MM OD) |  | |
| CIE66145 | CASE ALL | BUSHING (24MM OD) |  | |
| CIE66150 | CASE ALL | BUSHING |  | |
| CIE66155 | CASE ALL | BUSHING, FRAME TO SWING TOWER UPPER |  | |
| CIE66160 | CASE ALL | BUSHING, FRAME TO SWING TOWER LOWER |  | |
| CIE66165 | CASE ALL | BUSHING, ROD END |  | |
| CIE66170 | CASE ALL | BUSHING, OUTER SWING TOWER TWO PIN TYPE |  | |
| CIE66175 | CASE ALL | BUSHING, TUBE END SOLD SEPARATELY |  | |
| CIE66180 | CASE ALL | BUSHING, STABILIZER LEG |  | |
| CIE66185 | CASE ALL | BUSHING, STABILIZER ANCHOR 1-3/4 X 2-1/4 X 1 |  | |
| CIE66190 | CASE ALL | BUSHING, SWING CYLINDER MOUNT |  | |
| CIE66195 | CASE ALL | BUSHING |  | |
| CIE66200 | CASE ALL | BUSHING |  | |
| CIE66205 | CASE ALL | BUSHING |  | |
| CIE66210 | CASE ALL | BUSHING, FRAME TO SWING TOWER LOWER |  | |
| CIE66215 | CASE ALL | BUSHING 1 PIN STYLE |  | |
| CIE66220 | CASE ALL | BUSHING |  | |
| CIE66225 | CASE ALL | BUSHING, INNER SWING TOWER 2 PIN STYLE |  | |
| CIE66230 | CASE ALL | BUSHING |  | |
| CIE66235 | CASE ALL | BUSHING, AT DIPPER CYLINDER |  | |
| CIE66240 | CASE ALL | BUSHING, DIPPER CYLINDER |  | |
| CIE66245 | CASE ALL | BUSHING, BUCKET LINK PIN |  | |
| CIE66250 | CASE ALL | BUSHING, LINK AT BUCKET CYLINDER |  | |
| CIE66255 | CASE ALL | BUSHING, LINK AT CYLINDER |  | |
| CIE66260 | CASE ALL | BUSHING, DIPPER AT BUCKET |  | |
| CIE66265 | CASE ALL | BUSHING, LOADER FRAME |  | |
| CIE66270 | CASE ALL | BUSHING, BUCKET LINK PIVOT 38.41MM ID X 47.65MM OD X 28.6MM L |  | |
| CIE66275 | CASE ALL | BUSHING, FRAME AT SWING TOWER LOWER |  | |
| CIE66280 | CASE ALL | BUSHING, FRAME AT SWING TOWER UPPER |  | |
| CIE66285 | CASE ALL | BUSHING |  | |
| CIE66290 | CASE ALL | BUSHING |  | |
| CIE66295 | CASE ALL | BUSHING |  | |
| CIE66300 | CASE ALL | BUSHING, BOOM CYLINDER PIVOT |  | |
| CIE66305 | CASE ALL | BUSHING, BOOM CYLINDER PIVOT |  | |
| CIE66310 | CASE ALL | BUSHING, LOWER SWING TOWER PIVOT |  | |
| CIE66315 | CASE ALL | BUSHING 70MM OD, 1" LENGTH |  | |
| CIE66320 | CASE ALL | KINGPOST BUSH |  | |
| CIE66325 | CASE ALL | BUSHING - SWIVEL HOUSING, USED WITH RIGHT HAND OR LEFT HAND SWIVEL HOUSING |  | |
| CIE66330 | CASE ALL | BUSHING HOUSING |  | |
| CIE66335 | CASE ALL | BUSHING SPINDLE, USED ON D125340 OR D125341 SPINDLE |  | |
| CIE66340 | CASE ALL | BUSHING - 28 MM LONG, AT BUCKET LINK |  | |
| CIE66345 | CASE ALL | BUSHING PISTON ROD SELF-ALIGNING |  | |
| CIE66350 | CASE ALL | BUSHING TUBE |  | |
| CIE66355 | CASE ALL | LINK BUSH |  | |
| CIE66360 | CASE ALL | LOADER BUCKET PISTON |  | |
| CIE66361 | CASE ALL | STEERING BOX ASSEMBLY Fits Case/International Harvester Mitsubishi |  | |
| CIE66362 | CASE ALL | Steering Shaft Fits Case/International NUT DIA 518 MM Lentgh | ||
| CIE66365 | CASE ALL | POWER STEERING PUMP |  | |
| CIE66370 | CASE ALL | HYDRAULIC STEERING CYLINDER Fits 2WD two-wheel drive models and 4WD four-wheel drive models (with D124605 axles) |  | |
| CIE66375 | CASE ALL | HYDRAULIC STEERING CYLINDER 4WD four-wheel drive |  | |
| CIE66380 | CASE ALL | JOINT BALL, RIGHT-HAND THREADS |  | |
| CIE66385 | CASE ALL | STEERING ARM ASSEMBLY |  | |
| CIE66390 | CASE ALL | TIE ROD ASSY |  | |
| CIE66395 | CASE ALL | STEERING CYLINDER BALL JOINT |  | |
| CIE66400 | CASE ALL | POWER STEERING TIE ROD END Length: 2.19" Diameter: 0.687" 18 Right Hand Thread. |  | |
| CIE66405 | CASE ALL | POWER STEERING TIE ROD END FEMALE THREAD |  | |
| CIE66410 | CASE ALL | TIE ROD END 4.87" Long, 1 1/8" 12 UNF RH Thread |  | |
| CIE66415 | CASE ALL | TIE ROD END A= 3.125″; B= 0.687″; 18 RH Thread; STW16 Roller; W110 Roller |  | |
| CIE66420 | CASE ALL | TIE ROD END A= 3.125″; B= 0.687″; 18 LH Thread | ||
| CIE66425 | CASE ALL | TIE ROD END RH thread .875" Diameter 3-3/4” (3.75") to Center of Post | ||
| CIE66430 | CASE ALL | TIE ROD END LH Thread A - 3.750" B - .875" Dim C-18 NF | ||
| CIE66435 | CASE ALL | EYE - ROD, RIGHT-HAND THREAD |  | |
| CIE66440 | CASE ALL | EYE - ROD, LEFT-HAND THREAD |  | |
| CIE66445 | CASE ALL | STEERING SHAFT WORM TYPE DYNAMATIC MODEL |  | |
| CIE66450 | CASE ALL | JOINT - BALL, SWING CONTROL ROD TO SHAFT |  | |
| CIE66454 | CASE ALL | BRAKE MASTER CYLINDER KIT |  | |
| CIE66455 | CASE ALL | BRAKE MASTER CYLINDER |  | |
| CIE66460 | CASE ALL | BRAKE MASTER CYLINDER |  | |
| CIE66465 | CASE ALL | BRAKE MASTER CYLINDER |  | |
| CIE66470 | CASE ALL | BRAKE SLAVE CYLINDER |  | |
| CIE66472 | CASE ALL | Brake Assembly |  | |
| CIE66475 | CASE ALL | FRONT PARK BRAKE PIN |  | |
| CIE66480 | CASE ALL | FRICTION PLATE |  | |
| CIE66485 | CASE ALL | FRICTION PLATE |  | |
| CIE66490 | CASE ALL | FRICTION PLATE |  | |
| CIE66495 | CASE ALL | BRAKE DISC |  | |
| CIE66500 | CASE ALL | FRICTION DISC |  | |
| CIE66505 | CASE ALL | INTERMEDIATE DISC |  | |
| CIE66510 | CASE ALL | CLUTCH KIT 1PC EACH TYPE |  | |
| CIE66515 | CASE ALL | PLATE FRICTION |  | |
| CIE66520 | CASE ALL | PLATE FRICTION |  | |
| CIE66525 | CASE ALL | KIT BRAKE ADJUSTER |  | |
| CIE66530 | CASE ALL | CLUTCH CARBON |  | |
| CIE66535 | CASE ALL | CLUTCH CARBON |  | |
| CIE66540 | CASE ALL | CLUTCH FORK |  | |
| CIE66545 | CASE ALL | BRAKE PLATE SMALL 100 MM |  | |
| CIE66550 | CASE ALL | BRAKE DISC 6.5" OD, 3.5" ID, 1.625" Major, 1.395" Minor, 10 Spline |  | |
| CIE66555 | CASE ALL | BRAKE DISC Lining OD 5", Lining ID 2.75", Internal Splines 10 |  | |
| CIE66560 | CASE ALL | PREE CHAMBER (NON MAGNETIC) |  | |
| CIE66565 | CASE ALL | FILTER - OIL, CARTRIDGE, TRANSMISSION, 152 MM (6 INCH) LONG |  | |
| CIE66570 | CASE ALL | FILTER |  | |
| CIE66575 | CASE ALL | ENGINE MOUNTING |  | |
| CIE66580 | CASE ALL | ENGINE MOUNTING |  | |
| CIE66585 | CASE ALL | CAP HYDRAULIC OIL TANK, NONVENTED |  | |
| CIE66590 | CASE ALL | CAP - FUEL TANK, NON-VENTED |  | |
| CIE66595 | CASE ALL | TRANSMISSION - CHARGING PUMP |  | |
| CIE66600 | CASE ALL | TRANSMISSION - CHARGING PUMP |  | |
| CIE66605 | CASE ALL | TRANSMISSION - CHARGING PUMP |  | |
| CIE66610 | CASE ALL | TRANSMISSION - CHARGING PUMP |  | |
| CIE66611 | CASE ALL | Water Pump Fits International 986 1466 886 766 1066 1486 966 1086 Fits Case IH Tech Info: Drive Type - Pulley Pulley Type - Single/Double Groove V Belt Includes Hub, 8 Fin Impeller, |  | |
| CIE66612 | CASE ALL | Water Pump for Case International Tractor 580 SUPER K BACKHOE LOADER |  | |
| CIE66613 | CASE ALL | Water Pump, Farmall H, W4, Super H, 300, 350, 54148DA |  | |
| CIE66615 | CASE ALL | ANNULUS RING GEAR |  | |
| CIE66620 | CASE ALL | ANNULUS RING |  | |
| CIE66625 | CASE ALL | ANNULUS RING PLANETARY |  | |
| CIE66630 | CASE ALL | ANNULUS RING GEAR |  | |
| CIE66635 | CASE ALL | PLANET GEAR |  | |
| CIE66640 | CASE ALL | PLANET GEAR |  | |
| CIE66645 | CASE ALL | PINION SHAFT |  | |
| CIE66650 | CASE ALL | SHAFT GEAR |  | |
| CIE66655 | CASE ALL | SHAFT |  | |
| CIE66660 | CASE ALL | SHAFT |  | |
| CIE66665 | CASE ALL | BEARING NEEDLE PLANETARY GEAR, PACKET 10 PCS |  | |
| CIE66670 | CASE ALL | SHAFT GEAR |  | |
| CIE66675 | CASE ALL | BEARING NEEDLE ROLER SET OF 10 NOS 168 ROLER NEED FOR PLANETARY GEAR |  | |
| CIE66680 | CASE ALL | BEARING - NEEDLE (PACKAGE OF 10 USED AS PINS)(6 REQUIRED) |  | |
| CIE66685 | CASE ALL | THRUST WASHER |  | |
| CIE66690 | CASE ALL | PINION GEAR RETAINER |  | |
| CIE66695 | CASE ALL | WASHER, LOCK, 72MM ID X 146MM OD X 5MM THICK, SWING TOWER, TOP OF LOWER CHASSIS PLATE |  | |
| CIE66700 | CASE ALL | BUSHING CARRIER |  | |
| CIE66705 | CASE ALL | THRUST WASHER |  | |
| CIE66710 | CASE ALL | THRUST WASHER |  | |
| CIE66715 | CASE ALL | BLOCK |  | |
| CIE66720 | CASE ALL | SPACER |  | |
| CIE66725 | CASE ALL | SPACER |  | |
| CIE66730 | CASE ALL | WASHER THRUST, PINION GEAR, OUTER |  | |
| CIE66735 | CASE ALL | WASHER THRUST, PINION GEAR, OUTER |  | |
| CIE66740 | CASE ALL | WASHER THRUST, PINION GEAR |  | |
| CIE66745 | CASE ALL | GASKET PISTON |  | |
| CIE66750 | CASE ALL | PISTON BRAKE |  | |
| CIE66755 | CASE ALL | SPRING OUTER |  | |
| CIE66760 | CASE ALL | SPRING INNER |  | |
| CIE66765 | CASE ALL | PLUG-DRAIN |  | |
| CIE66770 | CASE ALL | RING - EXTERNAL RETAINING. NO. 34 |  | |
| CIE66775 | CASE ALL | WASHER - THRUST |  | |
| CIE66780 | CASE ALL | WASHER THRUST |  | |
| CIE66785 | CASE ALL | PLATE PRESSURE |  | |
| CIE66790 | CASE ALL | HU 8 HOLE |  | |
| CIE66795 | CASE ALL | HUB 6 HOLE |  | |
| CIE66800 | CASE ALL | HUB 8 HOLE |  | |
| CIE66805 | CASE ALL | KIT WHEEL BEARING |  | |
| CIE66810 | CASE ALL | KIT WHEEL BEARING |  | |
| CIE66815 | CASE ALL | BOLT WHEEL RETAINING |  | |
| CIE66820 | CASE ALL | NUT HEX THICK SLOTTED, 1-1/8 INCH NF |  | |
| CIE66825 | CASE ALL | NUT HEX 18 MM -1.5, SPECIAL |  | |
| CIE66830 | CASE ALL | BUSHING RUBBER |  | |
| CIE66835 | CASE ALL | STUD WITH FLANGED COLLAR |  | |
| CIE66840 | CASE ALL | LOADER LIFT GLAND |  | |
| CIE66845 | CASE ALL | NIPPLE GREASE | ||
| CIE66850 | CASE ALL | ADAPTOR |  | |
| CIE66855 | CASE ALL | THRUST WASHER |  | |
| CIE66860 | CASE ALL | WASHER THRUST |  | |
| CIE66865 | CASE ALL | BOLT |  | |
| CIE66870 | CASE ALL | SCREW |  | |
| CIE66875 | CASE ALL | DIFFERENTIAL AXLE DRIVE SHAFT FRONT |  | |
| CIE66880 | CASE ALL | PIN LOCK INSIDE 175977A1 |  | |
| CIE66885 | CASE ALL | INPUT SHAFT | ||
| CIE66890 | CASE ALL | PTO LEVER RUBBER BOOT |  | |
| CIE66895 | CASE ALL | RING RETAINING |  | |
| CIE66900 | CASE ALL | SNAP RING |  | |
| CIE66905 | CASE ALL | STUD WITHOUT FLANGED COLLAR |  | |
| CIE66910 | CASE ALL | STUD HUB |  | |
| CIE66915 | CASE ALL | LOADER AXLE SPACER BUSH |  | |
| CIE66920 | CASE ALL | SHAFT WITH SPLINE |  | |
| CIE66925 | CASE ALL | YOKE |  | |
| CIE66930 | CASE ALL | UNIVERSAL JOINT |  | |
| CIE66935 | CASE ALL | STRAP + BOLT |  | |
| CIE66940 | CASE ALL | STRAP |  | |
| CIE66945 | CASE ALL | JOINT UNIVERSAL AXLE SHAFT CROSS |  | |
| CIE66950 | CASE ALL | POINT TOOTH CENTER |  | |
| CIE66955 | CASE ALL | PIN FLEX OUTER POINT AND SHANK |  | |
| CIE66960 | CASE ALL | LINK BLOCK |  | |
| CIE66965 | CASE ALL | |||
| CIE66970 | CASE ALL | BOLT HEX HEAD, 14 - 1.50 X 65 MM, SELF LOCKING |  | |
| CIE66975 | CASE ALL | HEX BOLT SELF LOCKING 10 - 1.25 X 50 MM, CLASS 10.9 |  | |
| CIE66980 | CASE ALL | BEARING FLANGED DISC |  | |
| CIE66985 | CASE ALL | BEARING |  | |
| CIE66990 | CASE ALL | BEARING BALL HUB |  | |
| CIE66995 | CASE ALL | BEARING TAPERED ROLLER, PINION GEAR |  | |
| CIE67000 | CASE ALL | BEARING TAPERED ROLLER, HUB |  | |
| CIE67005 | CASE ALL | BEARING CUP |  | |
| CIE67010 | CASE ALL | BEARING CONE |  | |
| CIE67015 | CASE ALL | BEARING CUP |  | |
| CIE67020 | CASE ALL | BEARING CUP |  | |
| CIE67025 | CASE ALL | SPINDLE BEARING ROLLER |  | |
| CIE67030 | CASE ALL | O RING |  | |
| CIE67035 | CASE ALL | O RING |  | |
| CIE67040 | CASE ALL | SPINDLE O RING |  | |
| CIE67045 | CASE ALL | 0-RING - LARGE |  | |
| CIE67050 | CASE ALL | 0 RING SMALL |  | |
| CIE67055 | CASE ALL | RING LOCK |  | |
| CIE67060 | CASE ALL | O RING SEALING |  | |
| CIE67065 | CASE ALL | O-RING |  | |
| CIE67070 | CASE ALL | O RING FOR ASSY 100557A1 |  | |
| CIE67075 | CASE ALL | O-RING-WHEEL HUB |  | |
| CIE67080 | CASE ALL | CARRIER - RING GEAR | ||
| CIE67085 | CASE ALL | RING BACKUP WHEEL HUB O-RING |  | |
| CIE67090 | CASE ALL | RING SEAL |  | |
| CIE67095 | CASE ALL | RING SEAL |  | |
| CIE67100 | CASE ALL | RING SEAL |  | |
| CIE67105 | CASE ALL | PISTON | ||
| CIE67110 | CASE ALL | SEAL OIL |  | |
| CIE67115 | CASE ALL | SEAL OIL CASSETTE |  | |
| CIE67120 | CASE ALL | SEAL OIL |  | |
| CIE67125 | CASE ALL | SEAL OIL 60 X 75 X 8 MM |  | |
| CIE67130 | CASE ALL | RING SEAL, SMALL |  | |
| CIE67135 | CASE ALL | RING SEAL |  | |
| CIE67140 | CASE ALL | SEAL OIL, PUMP HOUSING |  | |
| CIE67145 | CASE ALL | COVER DIFFERENTIAL |  | |
| CIE67150 | CASE ALL | SEAL OIL |  | |
| CIE67155 | CASE ALL | SEAL SHAFT |  | |
| CIE67160 | CASE ALL | SWIVEL HOUSING SEAL OIL |  | |
| CIE67165 | CASE ALL | SPINDLE DUST SEAL |  | |
| CIE67170 | CASE ALL | OIL SEAL |  | |
| CIE67175 | CASE ALL | SEAL HUB |  | |
| CIE67180 | CASE ALL | SEAL |  | |
| CIE67185 | CASE ALL | SEAL |  | |
| CIE67190 | CASE ALL | HAND THROTTLE CABLE 2250MM (88 5/8") LONG |  | |
| CIE67195 | CASE ALL | GRAIN BED AUGER WOOD BOARD 1-Board Required per Auger Weight - 0.86 lbs |  | |
| CIE67200 | CASE ALL | GRAIN BED AUGER FINGER GUIDE |  |